Products
Contact us

Add: 39 Tanan Road,Shijiazhuang,China

Website:www.heavypump.com

Postcode:050024

Tel:86-311-85883441   86-311-66175322        

Fax: 86-311-66175433   86-311-85828617

E-mail:  admin@heavypump.com           

               xinda-1@163.com

Robert My status 点击这里给我发消息
Steven My status 点击这里给我发消息
Nancy My status 点击这里给我发消息
Lily My status 点击这里给我发消息
Jianhua Ji My status 点击这里给我发消息
Jessie My status 点击这里给我发消息
Your current location:Home > FAQ

How to install seal ring?

1. The rubber suction seal ring. This side should touch the throatbush. The fillister should match the bulge of the throatbush.
2. The bulge of the throatbush has its processing exactness limitation. Sometimes, it could not match the seal ring very closely, which may lead the leakage. Under this situation, we use another thin rubber piece.
3. Get the round ring from the thin rubber piece.Make the rubber circle ring match the fillister of the suction seal ring well, the frame and the dimensions.Put the circle ring into the fillister of the suction seal ring and put the complete one on the throatbush.
4. We are sure the leakage is just due to the suction seal ring. Therefore, we offer the solutions of the problem this way.

Copyright@ Shijiazhuang Heavy Pump Company Limited   Fax:86-311-66175433  86-311-85828617

Tel:+86-311-85883441 86-311-66175322   Email:heavypump1@yahoo.com  xinda-1@163.com

Add:39 Tanan Road, Shijiazhuang,China     Made by【LanDian network】